Hardwood stair treads – Nothing adds beauty to a home as much as natural hardwood. At prices of up to $ 8 per board foot and more exotic varieties. But it can be prohibitively expensive, especially for use as stair treads. There are alternatives to solid hardwood treads that provide the same beauty in a much smaller price. So a shiny hardwood does not need to break the bank. Types Step: A solid wood sole is usually used when stair spans stringers without support. In this case, most codes require it to be made of 2-inch furniture grade hardwood. This approach is sure to be expensive, and solid wood is prone to warping over time.
A cheaper alternative is to construct the staircase in such a manner that the treads are made of heavy-grade wood. Which are then covered it with a false track which can be much thinner. One type false pattern is the adhesive-laminate consisting of three or four pieces of hardwood. Preferably oak, bonded closely together in an alternating grain pattern and then milled down to a 1-inch thickness. This eliminates distortion and is cheaper than doing the solid piece of hardwood stair treads. But it gives an undesirable pattern striped appearance.
The engineered hardwood stair treads, another type were made in China is an improvement. It consists of a laminated core made much like a butcher block. Covered by a quarter-inch layer of hard and an attached nose. This satisfies Architectural Woodwork Network standards for lamination and gives the impression of a solid tread. The hybrid sole is an even cheaper option and can be used as blankets will cover most of the tread. The outer edges of this pattern are made of a fine hardwood while a cheaper hardwood used in the center where it will not be seen.