Stair rail brackets – Handrail brackets or stair rail brackets for the perfect solution for those of you who want to elegant visibility railing at his home. They are ideal for places where we want to depletion of the railing posts and stainless steel pipes. For mounting stair rail brackets is very easy. Just the presence of the wall, the wall or other surface to which they are mounted. Place the lowest rail bracket first. Use a level to make sure that the holder is perpendicular to the wall. Place the bracket over a stud brand. To punch small marks in the drywall to designate instead of the holes, please use a small screwdriver or an awl.
Through the drywall into the spikes please predrilled holes. These to allow the stair rail brackets to be fitted to the wall. Use a 1/8 inch drill and be sure to get them directly into the wall without being in any angle. Connect bracket to the wall with 2 inch finishing screws. Cut lengths of rail to fit on the wall with enough overlap to reach past the wall brackets by a few inches. Use a circular or miter saw to make cuts to fit the space required and sand sharp or rough edges using medium-grit sandpaper.
12 Photos Gallery of: Stair Rail Brackets and Handrail Installation
Place the rail over the stair rail brackets and test fit. Ensure it is properly adjusted and just above the brackets and mark the locations of the holes of the brackets to the underside of the rail. Remove the rail and drill holes about 1 cm deep into the wood. Put railway brackets and add 1 1/4 inch screws through the brackets and into the tree. Use a drill to secure them closely. And check the connection of the rail on the wall easily move on the tree.More reader came from this term: vintage handrail brackets