Low bunk beds with stairs – Bunk beds for children’s bedroom. They are a real saving of space but, there are many safety concerns originated in the number of accidents that occur with them. To safely install a ladder bunk hitch to a wooden bunk bed, cut slots in the upper bunk structure. These slots should be the same width as the ladder hooks to install. The best tool to use for this job is an alternative saw equipped with a wood cutting blade. With this tool, you can make quick and precise cuts to create the grooves to hold the ladder.
Adjust the ladder of the low bunk beds with stairs that you want to install in the place of the bunk bed where you want to stay. With a pencil, draw the lines where the scale hooks make with the bunk bed frame. Most ladders have two hooks, so you should draw four lines: one line on each side of each hook. Then, adjust the ladder to one side and pull out your Sierra swap. Align the sheet with the first line and cut 1/2 inch to 1 inch deep. Repeat this for the next 3 lines. The depth of cut must remain constant.
Insert the sheet of a chisel into one of the cut lines. Pull the two pieces of wood between the pairs of cut line and re-run the sharp part of the blade onto the rough wood surface to smooth out. You should now have two 1/2 inch to 1 inch deep slots cut into the frame. Also insert the hooks of your low bunk beds with stairs into the slots that you cut out of the frame of the bunk bed. If the ladder came with screws to attach to the frame, follow the included instructions to attach it to the frame. If not, your ladder will still remain in position without the screws through the slots you cut into the frame.low bunk beds with stairs