Vinyl stair tread – The staircase is an integral part of your home, allowing you access to different levels of living space. They are also an often neglected area that just begs for a personal touch and a little decorating style. Make a bold statement with your staircase, not just relegate it to the background. From the color of the carpet, the steps are suitable for a wide range of possibilities. Your staircase can become a focal point for a room or foyer, and not just a way to get from the first to the second floor. Vinyl steps are coatings typically are glued on top of the stairs. Installing vinyl stair treads provide better grip that minimizes slip and fall. The steps will also help extend the life of the stairs. They can be used in residential and commercial places.
Ideas for install vinyl stair tread. Measure the width and depth of each stair of the staircase. Each floor can be another measurement, so measure carefully. Be aware of stairs have a nose or not, if there is a nose (or ledge), this measurement should be so tread fits properly. Choose tread staircase. Point the steps of the stairs so that they are centered, and make a mark on the edges so that the tread can easily be adjusted after the adhesive has been applied. Remove steps and apply vinyl stair tread glue. The adhesive must bond to rubber or plastics, wood or metal. Gently place the stepped back in position aligned. Allow the glue to dry for at least 24 hours, or the recommended drying time for the glue used, before using the stairs.
Tips and warnings for install vinyl stair tread. Measure before you buy stairs so the right size can be purchased. If there’s a nose on the stairs, in the same way (with glue) can be used; It will only get more tread is needed to cover the stairs properly. Be careful when working with the glue, because the plastic adhesives are difficult to remove from surfaces.how to install vinyl stair treads, installing vinyl stair treads, stair tread ideas, vinyl stair treads