Stairs for dogs – So what you need to know are the following: The total height of the ladder – Measure the height or elevation from the ground to the desired level, such as the height of the bed, in order to obtain the right measurements stairs. You can also make use of a smaller measuring especially if the bed has a wooden siding that can act as an additional “climb” to the width of stairs. The would complement the size of your dog – it is important to get the right Width of the ladders so your dog can climb or lower with ease without having to fear for falling or sliding the ladder.
If it is too narrow, your dog may fall if you try to sit down and on one of the flights of stairs for dogs. Apart from that, if you have several dogs in the house, one of them can get pushed over the edge. It would also be a good idea to design a wide ladder if one of them is quite dominant and would not allow others to pass through. The measurement of the height and length of each step – The recommended height for climbing the ladder Varies from four to seven inches, depending on the size of your dog.
If you have a small dog, you have to go for 4 to 5 inches while large dogs can go from six to seven inches. The best way to determine this, however, is by measuring the height with which your dog can reach a level without having to enlarge their bodies. The height should never exceed the total leg length of your dog. The run of the ladder should be about a foot wide so that you can sit comfortably down or “take a break” whenever you want. You will receive the number of steps for your stairs for dogs by dividing the total height of the measurement of the rise.